水力空化改质对重质原油沥青质及性质的影响

利用水力空化过程产生局部的高温、高压、高射流以及强大的剪切力等极端化学物理条件改质处理沙特重质原油，试验结果表明：沙特重质原油经过水力空化改质后粘度由13.61降低至7.22mm2/s，残碳由7.16%降低至6.48%，实沸点蒸馏后减压渣油降低1个百分点。进一步采用APPI FT-IR MS、XRD、FT-IR、SEM和粒度分布等技术研究了水力空化改质对沙重原油分子组成，沥青质团聚体微晶结构、沥青质胶束粒径分布、沥青质官能团、沥青质形貌等方面的影响，从分子角度阐述空化改质重油的机理。研究结果表明：水力空化改质后沙重原油分子量分布、芳烃类化合物缔合作用变小；沥青质对低DBE化合物吸附性能降低；沥青质团聚体微晶结构更加松散；沥青质胶束粒度分布降低；沥青质分子相互团聚作用力减弱。进一步考察了水力空化改质前后减压渣油延迟焦化性能，改质处理后焦炭产率降低1.85个百分点，液体收率和气体产率分别增加1.52和0.33个百分点，水力空化改质对沥青质性质、结构特点的改善能够有效的提高其加工性能。     

高分子材料导热性能影响因素研究进展

介绍了高分子材料导热性能影响因素研究进展，重点阐释了聚合物基体的结构特性（链结构、分子间相互作用、取向、结晶度等）、导热填料（种类、含量、形态、尺寸等）以及制备方法等对高分子材料导热性能的影响。     

Microstructural characteristics of as-forged and β-air-cooled Zr–2.5Nb alloy

Multiple characterization and analysis techniques including electron backscatter diffraction (EBSD), electron channeling contrast (ECC) imaging, transmission electron microscopy (TEM) and microhardness test were jointly employed to investigate microstructural characteristics such as local composition, morphology, grain boundary characteristics and interphase orientation relationship of a forged Zr–2.5Nb alloy before and after β-air-cooling. Results show that the as-forged specimen is composed of equiaxed and lamellar α grains and continuous net-like β-Zr films. After the β-air-cooling, the microstructure of the specimen is featured by basket-weave Widmanstätten structure, in which the inter-α-plate second phases are nanoscale β-Zr. Analyses for crystallographic orientations reveal that the Burgers relationship has been strictly followed during the β→α cooling. Compared to the as-forged specimen, the hardness of the β-air-cooled specimen is higher, which could be attributed to the decreased structural sizes of both α and β phases, and the increased fraction of high angle boundaries as well.     

Effect of neodymium substitution on crystalline orientation,microstructure and electric properties of sol-gel derived PZT thin films

Pb(Nd_xZr_0.52Ti_0.48)O₃ (PNZT) (x = 0%, 1%, 2%, 3%, 4%, 5%) thin films were prepared by sol-gel process to investigate the effects of neodymium substitution on crystalline orientation, microstructure and electric properties of lead zirconate titanate (PZT) films. X-ray diffraction (XRD) and scanning electron microscope (SEM) analysis showed that PNZT films with Nd doping concentration below 3% exhibited dense perovskite structure with (100) preferred orientation. The average grain size of PNZT films decreased as the Nd substitution increased. The maximum dielectric constant, remnant polarization and minimum coercive field were obtained in 2% Nd-doped PZT films. Fatigue resistance was also improved significantly with 2% Nd dopant.     

Linking entrepreneurial orientation to project success

Entrepreneurial orientation (EO) is a strategic posture of an organization, and it is related to basic policies and practices for the development of entrepreneurial actions looking for creating competitive advantages. This study develops and tests a model of the relationship between entrepreneurial orientation and project success in Brazilian context. As quantitative research, a survey was used to collect data. A sample of 100 valid answers from project practitioners was treated through the structural equation modeling method. As research implications, the main result points out the positive correlation between the entrepreneurial orientation and the project success, contributing to the development of this research subject and helping to minimize the gap in the literature that addresses the relationship between project success and EO. In practical terms, understanding that innovativeness, risk taking, proactiveness, autonomy and competitive aggressiveness (the dimensions of the EO) can contribute to project success and can also indirectly impact on organizational performance, could help organizations get competitive advantage when developing correlate factors. Finally, the results suggest that practices of project management can be aligned to the firm's entrepreneurial orientation to enable firms to attain better results in their projects and generate a competitive advantage. On other hand, given the proportion of the impact of EO on project success (20.3%) identified in this study, it is critical that project management professionals expand their horizon to recognize other factors that affect project success.     

Electrical Characterization of Individual Cesium Lead Halide Perovskite Nanowires Using Conductive AFM

Perovskite nanostructures have attracted much attention in recent years due to their suitability for a variety of applications such as photovoltaics, light-emitting diodes (LEDs), nanometer-size lasing, and more. These uses rely on the conductive properties of these nanostructures. However, electrical characterization of individual, thin perovskite nanowires has not yet been reported. Here, conductive atomic force microscopy characterization of individual cesium lead halide nanowires is presented. Clear differences are observed in the conductivity of nanowires containing only bromide and nanowires containing a mixture of bromide and iodide. The differences are attributed to a higher density of crystalline defects, deeper trap states, and higher inherent conductivity for nanowires with mixed bromide–iodide content.     

Solvent-Free Plasticity and Programmable Mechanical Behaviors of Engineered Proteins

Biopolymeric networks with plasticity show great competences in diverse fields owing to the combined biocompatible and mechanical characteristics. However, to realize such plasticity external complicated treatments, e.g., UV or organic solvent have to be applied, which in turn impair the biological nature and even mechanical properties of those systems. To address this challenge, one new type of anhydrous protein liquid crystalline (LC) gels, which exhibit flexible morphological plasticity and mechanical programmability is demonstrated. Supramolecular interactions in the smectic biogels play an important role for their high plasticity. Remarkably, the samples exhibit outstanding mechanical behaviors. The tensile strength and Young's modulus at MPa levels are comparable or even higher than chemically cross-linked hydrogels and LC elastomers. More importantly, mechanical programmability of the LC gels is achieved by genetically tuning the charge density of protein backbones. Consequently, the mechanical performance is manipulated in the range of one order of magnitude. Thus, this type of anhydrous protein LC gels offers great opportunities for load-bearing high-tech applications.     

Influence of market orientation on performance: the moderating roles of customer participation breadth and depth in new product development

ABSTRACT

With a greater number of B2B firms integrating customers into the new product development (NPD) process, how to utilize customer involvement in NPD is an important decision because it may be a double-edged sword carrying both bright and dark sides. Utilizing a sample of 193 B2B firms across various industries, we validate previous research that suggests market orientation positively influences NPD performance and subsequently examine how this relationship may either be enhanced or diminished contingent upon how customers are utilized in the NPD process. The results show that the market orientation–NPD performance relationship is enhanced by having customers participate in a greater number of activities throughout NPD (customer participation breadth) and diminished when customers are involved at deeper levels (customer participation depth). This research suggests that the exact involvement of customers is a critical decision and has clear implications for the dialogues about customer involvement and management of customer relationships.     

基于双树复小波的无参考立体图像质量评价

随着3D技术的不断发展，立体图像的使用领域越来越广泛，同时人们对图像的清晰度要求越来越高，因此，立体图像的质量评价成为关注点，基于此，提出了一种基于双树复小波变换的立体图像质量评价算法。使用双树复小波变换对立体图像的左、右视图进行处理，生成纹理结构图像，且根据最小能量误差的原理，获取左右视图的视差图；对纹理结构图像和视差图提取非对称广义高斯分布模型的参数、梯度幅值、相对梯度方向方差和奇异值曲线与坐标轴的面积等特征；使用AdaBoosting BP神经网络，进行训练和预测立体图像的质量得分。在LIVE立体图像数据库上的实验结果表明，新方法预测得分与主观得分有较好的一致性，获得了比较好的实验结果。     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.